2010-02-17

Gumstix Overo Fire!!!

But it is not only for overo issue. I never think ANTENNA is so much important in very close range.
When I try check wifi chip RT2870, It is still not work completely.
Anyway Fire:88W8686 needs ANTENNA even 30cm radius from AP.

And headache cross compile RT2870.
Change Makefile like that,Hope it will help for another too.
I used bitbake, So better use that tool chain for cross compile. Because bitbake already gitted kernel headers and build tool chain.
For example, little change RT2870's Makefile.
in ~/tmp/work dir there is source for build and ~/tmp/cross dir there is Tool chain.
But end of line should be "arm-angstrom-linux-gnueabi-", compiler will attach on that end.

ifeq ($(PLATFORM),PC)
# Linux 2.6
LINUX_SRC = ~/overo-oe/tmp/work/overo-angstrom-linux-gnueabi/linux-omap3-2.6.31-r51/image/lib/modules/2.6.31-omap1/build
LINUX_SRC_MODULE = ~/overo-oe/tmp/work/overo-angstrom-linux-gnueabi/linux-omap3-2.6.31-r51/image/lib/modules/2.6.31-omap1/kernel/drivers/net/wireless/
CROSS_COMPILE = /home/tknv/overo-oe/tmp/cross/armv7a/bin/arm-angstrom-linux-gnueabi-
endif

'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'
that version doesn't work in arm... still I am testing.

4 件のコメント:

Anonymous さんのコメント...

Hi!

I'm also trying to get a wifi USB stick working under Angstrom but on a beagleboard.
Can you tell me what bitbake recipe you used?

my email: dcopeto(at)gmail.com

thanks a lot for the help!
david

tknv さんのコメント...

Hi thanks comment.
I used omap3-console-image and usually at default that build rt73,rt2500,rt2x00 wifi chip drivers.
Which wifi chip will you use for beagleboard ?
also you can check it which wifi driver will build in defconfig file at your build image taget .bb file.

Anonymous さんのコメント...

Hi!
I don't have any recipe named omap3-console-image. :(

I want to use rt2870 with a linksys usb device with ID 1737:0077

Can you give me any hints on how to add this somehow?

thanks a lot for the help,
david

tknv さんのコメント...

Hi,
~org.openembedded.dev/recipes/images/omap3-console-image.bb
and build rt2870 driver above way.
good luck!

BCM4321 on Latitude D430

At kernel 3 find wireless hardware lspci | grep -i wireless  check using current kernel module with PCI bus address lspci -vv -s 0c:...